Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This test uses EDT filter driver to send IRP_MN__STOP_DEVICE to the target device stack(s). The EDT filter driver then forces a resource rebalance of the target device(s) in response to IRP_MN_FILTER_RESOURCE_REQUIREMENTS.
Test details
| Specifications |
|
| Platforms |
|
| Supported Releases |
|
| Expected run time (in minutes) | 8 |
| Category | Scenario |
| Timeout (in minutes) | 210 |
| Requires reboot | false |
| Requires special configuration | true |
| Type | automatic |
More Information
Parameters
| Parameter Name | Parameter Description |
|---|---|
| DQ | A WDTF SDEL query that is used to identify the target device(s) - https://go.microsoft.com/fwlink/?LinkId=232678 |
| Wpa2PskAesSsid | Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter. The default is 'kitstestssid'. |
| Wpa2PskPassword | Required ONLY if DUT or one of its child devices is a WiFi adapter. Please provide password of the WPA2 AES WiFi network specified using the Wpa2PskAesSsid parameter. The default is 'password'. |
| WDTFREMOTESYSTEM | Required ONLY if DUT or one of its child devices is a wired NIC that doesn't have an IPv6 gateway address. If determined to be required, please provide an IPv6 address that the test NIC can ping to test network I/O. Eg: fe80::78b6:810:9c12:46cd |
| DriverVerifierAdditionalDrivers | Additional drivers that should have Driver Verifier enabled |
| DriverVerifierExcludedFlags | Placeholder for Driver Verifier flags that may be manually excluded for the test run |
| NoSOCCriticalCheck | Turns off the check to determine if the device is SOC-critical. If this switch is enabled, SOC-critical devices will not be filtered out. |
| MultiDeviceHardwareIdSdelQueryHardwareID | Multi Device SDEL |
| MultiDeviceInstanceIdSdelWDKDeviceID | Device id of DUT |
| DriverVerifierCustomizeConfiguration | Specifies that this test may want to automatically update Driver Verifier settings |
| TestCycles | Number of cycles to run the test for. |
| DoSimpleIO | True or False. Runs SimpleIO (if found) on test devices before and after performing PNP operations. |
| IOPeriod | Time period in minutes to run SimpleIO (if found). |
| DoConcurrentIO | True or False. Uses WDTF concurrent IO interface to send I/O requests to target device stacks while performing PNP operations. |
Additional Documentation
Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s): - Device.DevFund additional documentation
Troubleshooting
For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.