Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
Important
This topic is part of the WiFiCx driver model. WiFiCx is the Wi-Fi driver model released in Windows 11. We recommend that you use WiFiCx to take advantage of the latest features. The previous Wi-Fi driver model WDI is in maintenance mode and will only receive high priority fixes.
OID_WDI_SET_ADAPTER_CONFIGURATION configures the adapter. It is an optional property and can only be sent before any ports are created.
| Scope | Set serialized with task | Normal execution time (seconds) |
|---|---|---|
| Adapter | Yes | 1 |
Set property parameters
| TLV | Multiple TLV instances allowed | Optional | Description |
|---|---|---|---|
| WDI_TLV_CONFIGURED_MAC_ADDRESS | X | MAC address. | |
| WDI_TLV_UNREACHABLE_DETECTION_THRESHOLD | X | Unreachable detection threshold. | |
| WDI_TLV_P2P_GO_INTERNAL_RESET_POLICY | X | Policy used by the firmware for operating channel selection after a Wi-Fi Direct GO Reset is stopped/restarted. | |
| WDI_TLV_BAND_ID_LIST | X | List of bands that are not allowed to be used by the IHV. If not specified any supported band can be used. | |
| WDI_TLV_LINK_QUALITY_BAR_MAP | Mapping of signal quality to Wi-Fi signal strength bars. This field should be ignored by the adapter and it should use the behavior specified in NDIS_STATUS_WDI_INDICATION_LINK_STATE_CHANGE for doing Link Quality notifications. | ||
| WDI_TLV_ADAPTER_NLO_SCAN_MODE | X | Indicates whether the NLO scans should be performed in active or passive mode. | |
| WDI_TLV_PLDR_SUPPORT | Specifies if PLDR is supported. |
Set property results
No additional data. The data in the header is sufficient.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 11 |
| Minimum supported server | Windows Server 2022 |
| Header | dot11wificxintf.h |