Share via

Running the Other Portable Tests

Note  This content applies to the Windows Logo Kit (WLK). For the latest information using the new Windows Hardware Certification Kit (HCK), see Windows HCK User's Guide on the Windows Hardware Dev Center.

Logo Program: Windows 7 (x86, x64) Logos

  1. Connect MTP Other Portable to the DTM Test Client Machine.

    Note  If the device supports mode switching, make sure that the device is in a mode that uses MTP.

  2. From DTM studio, Explorers Device Console, select your Machine Pool from the drop-down list. Select View By Machine, and locate your device in Available Devices.

    Note  You can find your device under "Portable Devices".

  3. Ensure that your device is powered on and registered in Device Console.

    • Right-click the device, select View Device XML, and verify the entries such as ModelID, DeviceID, and ImagePath for your device.
    • If your device does not appear or if you are seeing stale entries for previously connected devices, you may need to wait a few minutes and refresh the Device Console and/or reconnect the device.

  4. Create a new submission:

    a. From Device Console, select View By Submission.

    b. From the Submission drop down list, select <New Submission>.

    c. Select OS. The available options are Windows 7 Client or Windows 7 x64

    d. Select Category: Device Submission.

    e. Logo Program: Portable Devices Other Portable.

    f. Qualification Level: For Windows 7, select Logo:

    Note  If you are planning to submit for an Additional Qualification, that submission type may appear.

  5. Enter a name for your submission, and select your machine pool.

  6. Click Finish to complete and load the new submission.

  7. With the correct device selected, from the Available Jobs, you can now add jobs from the first Other Portables category. If your device connects via USB, you will see USB jobs in addition to the WPD Compliance Tests jobs. For requirements on running these jobs, please refer to the "Portable Devices Tests" section or view the job details in Job Explorer.

The following table indicates which jobs are required based on connectivity type and features supported that must be run:

Test Name Windows 7
USB BT IP
Connectivity Tests - USB

USB Address Description Test (Automated)

X

USB Descriptor test (Automated)

X

USB Device Control Requests (Automated)

X

USB Enumeration Stress (Automated)

X

USB Selective Suspend (Automated)

X

USB Specification Compliance (Automated)

X

USB Isochronous Alternate Interface Presence (Automated)

X

USB HIDView (CV) (Manual)

X

USB Device Framework (CV) (Manual)

X

USB Serial Number (Automated)

X

USB System Suspend Resume Test

X

USB Disable Enable (Automated)

X
Device Fundamentals Tests

Web Services for Devices

X

X

X

Run INFTest against a single INF

X

X

X

Device Path Exerciser

X

X

X

Plug and Play Driver Test

X

Concurrent Hardware And OS Test (CHAOS)

X

Embedded Signature Verification

X

WDF Logo Tests

X

Sleep Stress With IO

X

Disable Enable With IO

X

Common Scenario Stress With IO

X

Reinstall With IO

X
Portable Devices Tests for Other Portable

WPD Compliance Tests - ALL SERVICES

X

X

X

WPD Compliance Tests - CONTACT SERVICE

X

X

X

WPD Compliance Tests - METADATA SERVICE

X

X

X

WPD Compliance Tests - HINTS SERVICE

X

X

X

WPD Compliance Tests - MODEL_ID

X

X

X

WPD Compliance Tests - FUID

X

X

X

WPD Compliance Tests - NOTES SERVICE

X

X

X

WPD Compliance Tests - RINGTONE SERVICE

X

X

X

WPD Compliance Tests - STATUS SERVICE

X

X

X

Verify Portable Media Device correctly supports Selective Suspend (MANUAL)

X

WMDM Compliance Tests

X

X

X

MTP Compliance Test - Other Portable

X

WPD Compliance Tests (MANUAL)

X

X

X

 

Many Other Portable devices have the ability to connect to a PC using multiple modes. If the device is capable of connecting to the PC and appears as one of the following devices, additional testing is required:

  • If the device also functions as a Digital Media Renderer, Digital Media Server, or Digital Media Controller, you must submit results as a Network Media Device. For more information, go to Portable Devices Tests.

  • A device that loads a driver for other modes must pass the Device Fundamental Tests in order to digitally sign the driver.

 

 

Build date: 9/14/2012