Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
The following chart summarizes the OIDs used to get the operational characteristics of ATM miniport drivers and/or their NICs. Note that an ATM miniport driver handles such requests in its MiniportCoRequestfunction.
| Length | Q | S | Name |
|---|---|---|---|
4 |
O |
The VPI value (if any) to be used for all cells on the interface. |
|
Var |
O |
The nearest supported values of media parameters. |
|
6 |
M |
The current hardware address of the NIC |
|
8 |
O |
The VPI/VCI (if any) assigned to the Interim Local Management Interface |
|
4 |
O |
The maximum packet size supported for AAL0 |
|
4 |
O |
The maximum packet size supported for AAL1 |
|
4 |
0 |
The maximum packet size supported for AAL 3/4 |
|
4 |
M |
The maximum packet size supported for AAL5 |
|
4 |
M |
The number of usable VCI bits |
|
4 |
M |
The number of usable VPI bits |
|
4 |
M |
The maximum active VCs supported by the miniport driver |
|
8 |
O |
The VPI/VCI (if any) assigned to the signaling VC |
|
4 |
M |
The supported AAL types |
|
4 |
M |
OID_ATM_SUPPORTED_SERVICE_CATEGORY The supported service categories. |
|
8 |
O |
The minimum and maximum cell transmission rates |