Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
The VoiceDialNumberSetup entry identities the AT commands that are used to place a call in voice mode.
Format
One or more command strings.
Examples
HKR, VoiceDialNumberSetup, 1,, "at#cls=8<cr>"
HKR, VoiceDialNumberSetup, 2,, "at#vls=0<cr>"
HKR, VoiceDialNumberSetup, 3,, "at#vrn=0<cr>"
HKR, VoiceDialNumberSetup, 4,, "at#vbt=1<cr>"
Remarks
Usually, the following actions are implemented in VoiceDialNumberSetup:
Place the modem into voice mode.
Set the DTMF tone-generation duration.
Make sure the speakerphone is on the hook.
Set the modem to connect immediately after dialing. However, if the modem cannot detect a busy line while in voice mode (or in speakerphone mode while in voice mode), the modem should not be set to connect immediately, so that the modem has a chance to report a busy line before it is connected.