Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
The following topics describe registry entries that are subkeys of the Settings INF file entry.
In this section
Topic | Description |
---|---|
The Blind_Off and Blind_On settings define the AT commands that are used to set the modem's blind dialing modes.
|
|
The CallSetupFailTimer entry defines the AT command that is used to set the modem's call fail timer. |
|
The Compression_On and Compression_Off settings specify the command strings required to set the modem's compression modes. |
|
The DialPrefix entry indicates characters that are appended to dial strings following the Prefix characters. |
|
The DialSuffix entry indicates characters that are appended to dial strings before the Terminator characters. |
|
The error control settings configure the commands that set the modem's error control.
|
|
The flow control settings identify the command strings that configure the modem's flow control. |
|
The InactivityTimeout entry specifies the InactivityTimeout command string. The equation for InactivityTimeout is as follows: InactivityTimeout * InactivityScale = inactivity time-out in seconds |
|
The modulation settings specify the command strings that are required to set the modem's modulation modes. The available modulation modes are as follows:
|
|
The Prefix entry specifies the command string that indicates which characters are prefixed to every Settings command sent to the modem. |
|
The Pulse and Tone entries specify the characters that are required to indicate Pulse or Tone dialing. These characters are inserted into the dialing string immediately following the DialPrefix characters. |
|
SpeakerMode_Off, SpeakerMode_Dial, SpeakerMode_On, SpeakerMode_Setup |
The speaker mode settings specify the command strings that are used to set the modem's speaker mode. |
The speaker volume settings specify the command strings that are used to set the modem's speaker volume. |
|
The SpeedNegotiation_Off and SpeedNegotiation_On settings specify the command strings that are used to set the modem's speed negotiation modes.
|
|
The Terminator entry specifies the command string that indicates the characters that are appended to every Settings command sent to the modem. Format A single command string. |