Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
There are several cases that got to me regarding the MSMQ “Insufficient resource” error (MQ_ERROR_INSUFFICIENT_RESOURCES). Most of them can be pinpointed by performing the following troubleshooting steps. So I think it deserves sharing with you.
1. In the event log, you are supposed to see the following related error:
Event Type: Error
Event Source: MSMQ
Event Category: Devices
Event ID: 2017
Date: 10/4/2005
Time: 2:07:48 PM
User: N/A
Computer: XXXXXXX
Description:
Unable to initialize the Message Queuing service.
2. At the same time, the msmq log will have the following entry:
0x18b8> Tue Oct 04 14:07:48 2005: QM Error: main/1030, HR: 0xc000009a
0x18b8> Tue Oct 04 14:07:48 2005: QM Error: main/1090, BOOL: 0
0x18b8> Tue Oct 04 14:07:48 2005: QM Error: main/1202, BOOL: 0
0xc000009a means STATUS_INSUFFICIENT_RESOURCES.
3. If you have tmq tool, you can check the “tmq state” result:
Pools limitations (calculated approximately, in KB
Paged : limit 307,200 used for 43 %
Nonpaged : limit 262,144 used for 12 %
The current paged pool usage is 307MB*43% = 132MB. Almost 80% of the maximum paged pool usage(around 163M).
Therefore, the customer should have encountered the MSMQ paged pool issue of following KB:
810507 MSMQ: Error 0xc00e0027 When You Send or Receive a Microsoft Message
<https://support.microsoft.com/?id=810507>
811308 MSMQ: How to Increase the Kernel Memory Threshold
<https://support.microsoft.com/?id=811308>
Solution:
1. Remove /3GB switch in boot.ini if you have.
2. Modify following registry key(if doesn’t exist, add it manually)
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Memory Management\PoolUsageMaximum = 60
HKEY_LOCAL_MACHINE\Software\Microsoft\MSMQ\Parameters\KernelMemThreshold (DWORD) = 95 (0x5F)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PagedPoolSize (DWORD) = 0xFFFFFFFF
3. Restart the machine to release the paged pool.
Thanks,
Yawei Wang
Comments
- Anonymous
June 17, 2009
PingBack from http://pooltoysite.info/story.php?id=6931